FlameFighter

Firemans axes are available in pick and flathead styles. Pickheads have two separate heads; one standard for cutting and one fashioned into a heavy-duty pick for forcible entry. The flathead style is a single bit with a flat poll. All have polished red finishes and a choice of wooden or fiberglass handles with rubber grips.

Read more less

The FlameFighter collar cushions offer critical supports and comfort in vehicle crew areas. Special design allows firefighters to strap on the SCBA unit while enroute. Backpad With All Mounting Brackets Included. (Not Shown) SCBA Brackets Sold Separately

Read more less

Hardened alloy steel jaws are designed and manufactured to assure the longest possible blade life. Handles and grips designed to allow greater mechanical advantage for crisp, controlled cutting. Make powerful cuts with minimum effort. High-carbon machined steel jaws cut rods, bolts, rivets, bars, and chains. Tubular steel handles with angled grips allow maximum leverage. Turn 50 lbs. of hand pressure into 4000 lbs. of cutting pressure. Drop-forged jaws with center-cut blades. Tools are heat treated to provide increased wear resistance and longer blade life.

Read more less

All Drywall hook poles have a round fiberglass handle with a plastic core for added stability, maximum strength, and minimum weight. Our handle is custom made for us rather than an "off-the-shelf" tube. The outside diameter of the handle is 1-1/4". The head is attached to the handle with spring pins and epoxy. Made in the USA. Sizes Available: Standard Handle: 2', 3', 4', 6', 8', 10', 12' "D" Grip Handle: 2', 3', 4', 6', 8', 10', 12'

Read more less

Used for smothering fires in grass, straw, weeds, and small brush. A flapper is a wildland firefighting tool that is also called a swatter or a beater. It is designed for extinguishing minor fires in rural areas. A flapper is built with a long handle which allows firefighters to stand well back from the fire.  Description  The rubber flexible flapper beats the air away from the flames, smothering the fire. The fire is attacked from the wind-side by lightly swatting out the flames or glows with the thick flap. When the flapper hits the ground oxygen supply to the fire is stopped and the fire will be extinguished. Where ground cover is short, the flapper can be dragged along the fire edge to smother the fire. Be careful, if used too hard, it can actually add more oxygen to the fire causing the fire to spread. It is often recommended to also hose water on the area, as there will always be a risk of it flaring up later. 60” Long Fiberglass handle

Read more less

The Fire Rake has four sharp mower blade teeth that quickly cut through small roots and matted grass. The tool can be used to cut through compact fuels or for light trenching. With duff or pine needles it serves as a rake. Comes with a 60" fiberglass handle.

Read more less

Get into buildings or other areas of confinement when normal means of entry are locked or blocked and when accessing doorways "through the lock" or "around the lock" depending on the techniques used.

Read more less

FlameFighter SCBA heavy duty safety strap with mounting bracket for SCBA brackets.

Read more less

Very effective in cleaning all types of dirty and caked hoses. Simply connect to a fire hydrant or pumper with recommended operating PSI of 40 to 60. Features Up To 3" Hose: Washes Up To 3" Hose Lightweight Aluminum Housing 30-60 GPM 1.5" NH Connection Standard ​​NH or NST = (National Hose Thread) or (National Standard Thread) - Both Are The Same Thread Features Up To 5" Hose: Washes Up To 5" Hose Lightweight Aluminum Housing 30-60 GPM 2.5" NH Connection Standard NH or NST = (National Hose Thread) or (National Standard Thread) - Both Are The Same Thread

Read more less

In crew areas where SCBA’s are stored, keep them locked securely in place with this system. You can don the SCBA while enroute and keep it safely secured. When you reach your destination, pull the lanyard from between your legs, or along side the seat and you are ready to go!! This bracket fits all brands and tank sizes. Features: Meets NFPA 1901-03 Third Party Tested Fits All Single SCBA Bottles Flamefighter 3-Point Release Lifetime Warranty

Read more less

All Pike Poles have a round fiberglass handle with a plastic core for added stability, maximum strength, and minimum weight. Our handle is custom made for us rather than an "off-the-shelf" tube. The outside diameter of the handle is 1-1/4". The head is attached to the handle with spring pins and epoxy. Made in the USA. Sizes Available: Standard Handle: 2', 3', 4', 6', 8', 10', 12', or 14' "D" Grip Handle: 2', 3', 4', 6', 8', 10', 12', or 14'

Read more less

Heavy-duty pinch point bar is drop-forged and treated for superior strength for prying, digging and tampering. Available in: 36" 51" or 60" lengths.

Read more less

Combination axe and grub hoe for chopping, grubbing and digging fire lines in brushy, rocky terrain. 3-3/4 lb. Head. 36" Fiberglass handle.

Read more less

The clips are coated with a base coat of high grade nylon and a second layer of high grade thermoplastic for added extra protection on the tips of the clips. For use with all cylinders including carbon fiber. Third party tested to over 50,000 cycles. (Sold per Clip) 30 Min. HP (High Pressure) - Clip Only 5.25" 30 Min. LP (Low Pressure) / 45 min. High Pressure - Clip Only 6.10" to 6.75" 60 Min. LP & HP - Clip Only 7.25"

Read more less

The rugged FlameFighter bracket safeguards your SCBA cylinders from scarring and damage. The highest quality nylon protective coating and thermoplastic available will outlast all other coatings. Strong resilient cylinder clips made of spring steel will hold their shape and will not damage the cylinder. Our clips are coated with a base coat of high grade nylon and a second layer of high grade thermoplastic for added extra protection on the tips of the clips. For use with all cylinders including carbon fiber. Third party tested to over 50,000 cycles 30 Min. HP (High Pressure) - SCBA Bracket 5.25" 30 Min. LP (Low Pressure) / 45 min. High Pressure - SCBA Bracket 6.10" to 6.75" 60 Min. LP & HP - SCBA Bracket 7.25"

Read more less

The Flamefighter D-Handle Shovel is 27" in length.All Poles are produced from thousands of continuous fiberglass strands, saturated with thermosetting resins and a center plastic core for added stabilityA non-fiberglass polyester veil is impregnated on the surface giving the Pole a smooth finish and keeps the fiberglass from splintering.

Read more less

The FlameFighter NonSpark Haz-Mat Shovel has handles that are produced from thousands of continuous strands of fiberglass. The fiberglass handle is saturated with thermosetting resins and a non-fiberglass polyester veil impregnated on the surface.The veil gives the handle a smooth finish and keeps the fiberglass from splintering. These non-absorbent, ribbed blade shovels, are made of non-sparking Cycolac plastic.Features: 38" Fiberglass "D" Handle Measurements: 14.5" x 17 - 3/4"

Read more less

The fiberglass handle is saturated with thermosetting resins and a non-fiberglass polyester veil impregnated on the surface. The veil gives the handle a smooth finish and keeps the fiberglass from splintering.27" Round Point Shovel: 27" Fiberglass D Handle Measurements: 8-7/8" x 11-3/4" 48" Round Point Shovel: 48" Fiberglass Handle Measurements: 8 - 7/8" x 11-3/4"

Read more less

Essential, versatile tool for Wildland firefighting. Designed for digging, planting, scooping, cutting soil and small rocks. Heavy Tempered Steel Blade for Maximum Strength. Ultra-Lite Fiberglass Handle for Durability. Sizes Available: 27" Fiberglass With "D" Grip 48" Fiberglass

Read more less

With features such as reinforced fiberglass handles and the highest quality components from manufacturers around the world, you can expect this sledge hammer to outperform and outlast any other on the market.  Compare the quality of this sledge hammer with others. Available in: 8lb, 10lb, 12lb, 16lb, or 20lb

Read more less