New look, same great store!

Products

  • A-TAC NFPA Structural Goggle A-TAC NFPA Structural Goggle

    Paulson A-TAC NFPA Structural Goggle

    The model 510-SL NFPA compliant goggle features a silicone frame & strap that can be worn on the head or helmet. Goggles will fit comfortably over prescription eyewear. A protective goggle designed to specifically address the needs of the fire fighter. Optically correct hard coated outer lens with an anti-fog inner lens coating. Baffled top and bottom vents. Silicone strap designed for comfort when worn on the head and may be stowed on the helmet. Strap tension is adjustable while wearing gloves. Silicon Strap.  Designed to meet the performance specifications of NFPA 1971, 1977, 1951, ANSI Z87.1

    $76.00

  • A-TAC Wildland Firefighter Goggle

    Paulson A-TAC Wildland Firefighter Goggle

    Protective goggle designed tospecifically address the needs of thewildland firefighter. Baffled top andbottom vents. Elastic strap designedfor comfort when worn on the headand may be stowed on the helmet. NFPA 1971, 1977, 1951ANSI Z87.1+ Wildland firefighting operations and other emergency operations where there is a threat of fire. Also designed for other physical hazards such as non fire related salvage, rescue operations, emergency medical operations, and victim extraction.

    $57.00

  • Aervoe Collapsible Traffic Cone Set

    Aervoe Aervoe Collapsible Traffic Cone Set

    5-Pack kit contains 5 – 28″ safety cones. Each cone has an 8 lb. weighted rubber base and collapses for storage in a car trunk, utility truck, or toolbox. Each Cone Features: 8 lb. weighted rubber base Collapses flat for easy storage Made of durable nylon Reflective 4″ and 6″ stripes Includes 2 – blinking red LED lights (one for the top of the cone and one to illuminate the inside of the cone) Includes the storage case that holds the cone and lights Meets MUTCD specifications (4″ & 6″ reflective bands) Meets NFPA 1901 Standards; Section 6.7.3 Miscellaneous Equipment Requires 4 AAA batteries (included) Applications:  roadside safety, construction sites, warehouse/retail hazard identification, emergency services personnel, tow trucks, and personal automotive safety. Dimensions : 16” L x 16” W x 16” H – 49 lbs. These cones are made with a durable rubber base that weighs 8 lbs. and can withstand road traffic and high winds. The cone material is a bright, durable nylon with 2 reflective silver bands, which can be seen up to 1000 feet (300 m) away. For added nighttime visibility, the included red LED lights flash or can be set in a steady-on position. Requires two AAA batteries to operate the light (included) and will operate the flashing light for 40-60 hours. All materials are highly durable and made to withstand outdoor conditions. A yellow LED light is sold separately as an option. 5-pack kits are available for the 28” and 36” Cones to comply with national NFPA 1901 Fire Vehicle and Apparatus requirements. Also complies with MUTCD, FHWA, and other local and state requirements for safety cones on commercial and utility vehicles.

    $126.00

  • Aervoe LED Baton Road Flare Aervoe LED Baton Road Flare

    Aervoe Aervoe LED Baton Road Flare

    A multi-functional flare that can be a road flare or a safety wand. Strong enough to withstand heavy truck traffic yet light enough to hold easily in your hand to direct traffic. Features: (15) LEDs Visible up to (1) Mile (1) Half Watt Flashlight Waterproof & Floats Crush Proof Corrosion Proof High Strength Magnets Rechargeable Battery Included (5) Flash Patterns Including S.O.S Morse Code Includes: Storage Bag, 120V Wall Charger, 12V Car Charger & USB Charger Operating Temp: 14°F- 122°F (-10 °C – 50°C)

  • Aervoe LED Baton Road Flare Kit Aervoe LED Baton Road Flare Kit

    Aervoe Aervoe LED Baton Road Flare Kit

    LED Baton Road Flares are emergency safety flares that replace standard safety wands and incendiary flares. Use of these safety flares reduces the risk of fires, ground water contamination, and batteries in our landfills. The kit includes 3-single flares and 2-Flex Fit Tripods (#1159), inside a durable storage case that doubles as a charging unit with all chargers included. Features: (15) LEDs Visible up to (1) Mile (1) Half Watt Flashlight Waterproof & Floats Crush Proof Corrosion Proof High Strength Magnets Rechargeable Battery Included (5) Flash Patterns Including S.O.S Morse Code Includes: (3) Single Flares, Storage Case, (2) Flex Fit Tripods, 120V Wall Charger & 12V Car Charger Operating Temp. 14°F- 122°F (-10 °C – 50°C)

    $166.00

  • Aervoe Super LED Road Flares Aervoe Super LED Road Flares

    Aervoe Aervoe Super LED Road Flares

    An advanced version of our standard LED flare. It is slightly larger for double the light output and two rows of LED lights. It does not produce a flame, smoke, or harmful bi-products and does not require batteries! Recharges so that it is ready for use when needed. Features:  (24) Super Bright LEDs Are Visible up to 2 Mile (7) Flashing Patterns Including S.O.S. Morse Code Intrinsically Safe Design With a Rubber-Tight Seal (Not Certified) Powerful Magnet to Attach to Metal Surfaces Made of Durable Materials, Crush Proof, Corrosion Proof Waterproof Operating Temp. 14°F- 122°F (-10 °C – 50°C) Made in The USA Includes: Storage Bag, 120V Wall Charger & 12V Car Charger & USB Charger Meets: U.S. DOT, MUTCD & NFPA 1901 Standards

  • Aervoe Super LED Road Flares - 4PK Aervoe Super LED Road Flares - 4PK

    Aervoe Aervoe Super LED Road Flares - 4PK

    An advanced version of our standard LED flare.  It is slightly larger for double the light output and two rows of LED lights.  It does not produce a flame, smoke, or harmful bi-products and does not require batteries!  Recharges so that it is ready for use when needed.. Three LED colors to choose from. Features: (4) Super LED Road Flares (24) Super Bright LEDs Are Visible up to (1) Mile (5) Flashing Patterns Including S.O.S. Morse Code  Powerful Magnet Crush Proof, Corrosion Proof Waterproof And Submersible to 50' Includes: Storage Case, 120V Wall Charger & 12V Car Charger Storage Bag (Included) (2) Flex-Fit Tripods (Included) Meets: U.S. DOT, MUTCD & NFPA 1901

    $305.00

  • Sale -43%Last stock! AirSpace Monitoring System - CO Monitor

    AIRSPACE AirSpace Monitoring System - CO Monitor

    Our basic monitor is a great value for those situations where only an alarm is needed. EMS teams are using these alarms attached to a first in kit that will go in with them on every first response. The low cost of purchase, low cost to maintain, automatic function and rugged durability makes this monitor, hands down, the best option available for this use. CO IS NO LONGER A DANGER – or even a complicated issue for these teams. FINALLY, AFFORDABLE PROTECTION WHERE IT IS NEEDED! Features: CO Monitor with LED and Audible Alarms Solid State Five Year Warranty No Calibration Low Maintenance Easy to Use Cost Effective Lightweight, Rugged Design Certified Intrinsically Safe Low Battery Warring

    $350.00$199.00

  • Sale -33%Last stock! AirSpace Monitoring System - CO Monitor

    AirSpace AirSpace Monitoring System - CO Monitor

    Snif™ technology and an LCD display. The LCD on these models will accurately read CO levels from 12ppm to 250ppm. It also give visual and audio alarms at 30ppm, 60ppm and 120ppm. Snif™ technology provides an update every 4 seconds when in alarm. This feature will support searching for the source of CO and monitoring trends; i.e.; does opening windows bring the reading down, etc. Features: CO Monitor with Snif™ LCD readout LED and Audible Alarms Solid State Five Year Warranty No Calibration Low Maintenance Easy to Use Cost Effective Lightweight, Rugged Design Certified Intrinsically Safe Low Battery Warring

    $445.00$299.00

  • Ajax Air Axess Rescue Kit

    Ajax Rescue Tools Ajax Air Axess Rescue Kit

    The AJAX11-RK Axess tool is designed for cutting metal, chipping concrete or masonry brick, and digging in dirt or gravel. It is your all-purpose tool for applications such as forcible entry, trench rescue, structural collapse, mining collapse, and confined space rescue. Includes: (1) AJA1999 Axess Air Hammer With 3700S-9 Retainer (1) AJA3300S-9 Retainer (1) AJA1044 3/8" Male Coupler With 3/8" NPT (1) AJA1050 3/8" 90 Degree Swivel (1) AJA1030 15', 3/8" Hose With Male Coupler  (1) AJA1052 3/8" Female Coupler For Hose (3/8" NPT) (1) AJA8250H Regulator (4500 PSI) (1) AJA8246 Gauge Guard (1) AJA1048 3/8" Female Coupler For Regulator (1/4" NPT) (1) AJA5318 30" Steel Kit Box (1) AJA8262 Kit Box Liner (1) AJA1074 4 OZ. Bottle of Oil (1) AJA3000-RK 15.5" Chisel Pouch (1) AJA3100-RK 23.5" Chisel Pouch (2) 3189-PL Non Turn Panel Cutter 9" (2) 3180-PL Non Turn Kwik Cutter 9" (1) AJA3182-PL Non Turn Flat Chisel 7" (2) AJA3180-18-PL Non Turn Kwik Cutter 18" (1) AJA3182-18-PL Non Turn Flat Chisel 18" (1) AJA3184-18-PL Non Turn 1.5" Wide Chisel 18" (1) AJA3190-12-PL Non Turn Moil Point (1) 3188-PL Non Turn Clay Spade

    $3,295.00

  • Ajax Heavy Duty Air-Hammer Rescue Kits Ajax Heavy Duty Air-Hammer Rescue Kits

    Ajax Rescue Tools Ajax Heavy Duty Air-Hammer Rescue Kits

    The Ajax AJA811-RK Heavy Duty Kit is a very powerful mid range hammer that features a longer piston stroke for a very hard hitting hammer. The AJA811-RK uses .401 shank chisels and includes non-turn and turn type chisels, and all the items necessary to start the Rescue or Extrication process. Includes: (1) AJA1973 Hammer for .401" Shank Tools (1) AJA3300S-42 Retainer (1) AJA8250H Regulator (2) AJA3159-PL Double Blade Panel Cutter (Non-Turn) (2) AJA3156-PL Kwik Cutter (Non-Turn) (2) AJA3156-18-PL 18" Kwik Cutter (Non-Turn) (2) AJA909-9-PL Panel Cutter (Turn-Type) (2) AJA932-PL Kwik Cutter (Turn-Type) (2) AJA932-18-PL 18-in. Kwik Cutter (Turn-Type) (1) AJA929-PL Ripper Chisel (Turn-Type) (1) AJA940-PL Moil Point (Turn-Type) (1) AJA998 15', 1/4" Hose (2) AJA992 Male Connector (1/4" NPT Hose & Hammer) (1) AJA996 Male Coupler (1/4" NPT Regulator) (1) AJA993 Female Coupler (1/4" NPT Hose) (1) AJA8246 Gauge Guard (1) AJA5317 20" Steel Kit Box (1) AJA8259 Kit Box Liner (1) AJA1074 4-oz. Oil AJA811-RKM Master Kit includes all the above with an additional 1/2" impact wrench and an 11-Piece fractional socket set!

    $1,895.00

  • Ajax Standard Air-Hammer Rescue Kits Ajax Standard Air-Hammer Rescue Kits

    Ajax Rescue Tools Ajax Standard Air-Hammer Rescue Kits

    The Ajax AJA711-RK Standard Duty Kit is our introductory level kit.  This kit offers the Rescue technician everything that will be needed to hook up an air tank and begin the Rescue or Extrication process. The AJA711-RK uses .401 shank non-tune chisels. Includes: (1) AJA1974 Hammer For .401" Shank Tools  (1) AJA3300-U Retainer (1) AJA8245H Regulator (2) AJA3159-PL Double Blade Panel Cutter (Non-Turn) (2) AJA3156-PL Kwik Cutter (Non-Turn) (2) AJA3156-18-PL 18" Kwik Cutter (Non-Turn) (1) AJA940-PL Moil Point (Turn-Type) (1) AJA998 15', 1/4" Hose (2) AJA992 Male Connector (1/4" NPT Hose & Hammer) (1) AJA996 Male Coupler (1/4" NPT Regulator) (1) AJA993 Female Coupler (1/4" NPT Hose) (1) AJA8246 Gauge Guard (1) AJA5317 20" Steel Kit Box (1) AJA8259 Kit Box Liner (1) AJA1074 4-oz. Oil (1) AJA674-RT Trim Removal Tool AJA711-RKM Master Kit includes all the above with an additional 1/2" impact wrench and an 11-Piece fractional socket set!

    $1,175.00

  • Ajax Super Duty Air-Hammer Rescue Kits Ajax Super Duty Air-Hammer Rescue Kits

    Ajax Rescue Tools Ajax Super Duty Air-Hammer Rescue Kits

    The AJA911-RK Super Duty Kit is our most forceful kit. This kit features the most powerful and hardest hitting hammer. This is the kit that is used when you don’t know what you will need to cut to perform the Rescue or Extrication. The AJA911-RK uses .498 shank chisels and includes non-turn and turn type chisels, and all the items necessary to start the Rescue or Extrication process. Includes: (1) AJA1976 Hammer for .498" shank tools (1) AJA3700S-3 Retainer (1) AJA8250H Regulator (2) AJA8260 Ergo Chisel Grip (Non-Turn) (1) AJA3190-12-PL 12" Moil Point (Non-Turn) (2) AJA3189-PL Double Blade Panel Cutter (Non-Turn) (2) AJA3180-PL Kwik Cutter (Non-Turn) (2) AJA3180-18-PL 18" Kwik Cutter (Non-Turn) (2) AJA3089-PL Double Blade Panel Cutter (Turn-Type) (2) AJA3080-PL Kwik Cutter (Turn-Type) (2) AJA3080-18-PL 18" Kwik Cutter (Turn-Type) (1) AJA1030 15', 3/8" Hose (1) AJA1045 3/8" Male Connector (1/4" NPT Hammer) (1) AJA1048 3/8" Male Connector (1/4" NPT Regulator) (1) AJA1052 3/8" Female Coupler (3/8" NPT Hose) (1) AJA8246 Gauge Guard (1) AJA5317 20" Steel Kit Box (1) AJA8259 Kit Box Liner (1) AJA1074 4-oz. Oil (1) AJA674-RT Trim Removal Tool AJA911-RKM Master Kit includes all the above with an additional 1/2" impact wrench and an 11-Piece fractional socket set!

    $2,595.00

  • Ajax Trim Removal Tool Ajax Trim Removal Tool

    Ajax Rescue Tools Ajax Trim Removal Tool

    Ajax Trim & Removal tool is designed to expose the following hazards while preparing to extricate a victim from an automobile accident. This tool helps to revel the following hazards: Air Bag Canisters that have 3000 P.S.I. to 10,000 P.S.I. Seat Belt Pre-Tensioners, positioned in the lower portion of the “B” post Wire Looms that are connected to the Air Bags and Pre-Tensioner Systems Expose the Super Structure of the vehicle prior to cutting Brain box for the Air Bags (located in 1 of 4 places): Under seat, In dashboard, Center console or the lower front seat foot area

    $25.00

  • Akron Flow Test Kit - 2.5" Akron Flow Test Kit - 2.5"

    Akron Akron Flow Test Kit - 2.5"

    Standard with 3/4", 1", 1 1/4", 1 1/2", 1 3/4" (19, 25, 32, 38, 44 mm) tips  3 1/2" (89 mm) liquid filled 0-160 psi (0-1100 kpa) gauge  Large, heavy duty carrying case (FK-230), 18 3/8" W x 14 1/4" D x 8" H  2 1/2" NH (65 mm) female swivel - Standard  Certified calibrated gauges • Flow range: 25-700 gpm (95-2650 lpm)

    $0.00

  • Akron Hydrant Flow Test Kit - 2.5" NH

    Akron Akron Hydrant Flow Test Kit - 2.5" NH

    - Includes a 2 1/2" NH barrel with a pitot tube positioned in the waterway and water diffuser assembly- 3 1/2" liquid filled 0-160 psi (0-1100 kpa) gauge- Supplied with flow charts for accurate measuring- Pitot tube is positioned for accurate readings- Black case No Special Thread

    $0.00

  • Akron Plain Straight Tip - 1.5"

    Akron Akron Plain Straight Tip - 1.5"

    Akron Plain Straight Tip Female NH Inlet With 1-3/8" Orifice For Smooth Bore Nozzles. Features: 1 1/2" Female NH Plain Tip Pyrolite Finish  1 3/8" Standard Orifice Optional Tips - 7/8", 15/16", 1", 1 1/8", 1 3/16", 1 1/4" 5" Length NH or NST = (National Hose Thread) or (National Standard Thread) - Both Are The Same Thread

    $120.00

  • Akron Straight Gate Valve

    Akron Akron Straight Gate Valve

    Pyrolite heavy-duty wedge seat style gate valve with 2 1/2" inlet and outlet. Has a non-rising stem and crank handle for easy operation at standard operating pressures. Features: 21 Turns From Fully Closed to Fully Open Maximum Operating Pressure is 250 PSI 2.5" Swivel NH Female Inlet 2.5" Rigid NH Male Outlet  NH or NST = (National Hose Thread) or (National Standard Thread) - Both Are The Same Thread

    $750.00

  • Akron Turbojet Selectable GPM Nozzle - 1" Akron Turbojet Selectable GPM Nozzle - 1"

    Akron Akron Turbojet Selectable GPM Nozzle - 1"

    The Turbojet is a constant gallonage nozzle (flow remains the same in all patterns) with multiple flow settings for operator flow control. Use the Turbojet one time and see why it's the nozzle of choice by firefighters worldwide. Features: 1" NH Female Swivel Inlet 13-25-40-60 GPM Flow Settings Pattern Identification Larger More Legible Labels Simple to Operate (1/4 Turn From Straight Stream to Fog) Raised Lug Marks Straight Stream For Limited Visibility Operations Easy to Service & Repair Flow Setting at 100 PSI Raised Bumper Lug For Straight Stream Pattern Identification Compatible With Quick-Attack Foam Tube Style AKR790 Available With or Without Pistol Grip Handle ​NH or NST = (National Hose Thread) or (National Standard Thread) - Both Are The Same Thread

    $799.00

  • Akron Turbojet Selectable GPM Nozzle - 1.5" Akron Turbojet Selectable GPM Nozzle - 1.5"

    Akron Akron Turbojet Selectable GPM Nozzle - 1.5"

    The Turbojet is a constant gallonage nozzle (flow remains the same in all patterns) with multiple flow settings for operator flow control. Use the Turbojet one time and see why it's the fire hose nozzle of choice by firefighters worldwide.   Nozzle Features: 1.5" NH Female Swivel Inlet 30-60-95-125 GPM Flow Settings Pattern Identification Larger More Legible Labels Simple to Operate (1/4 Turn From Straight Stream to Fog) Raised Lug Marks Straight Stream For Limited Visibility Operations Easy to Service & Repair Flow Setting at 100 PSI, 75 PSI Optional Raised Bumper Lug For Straight Stream Pattern Identification Compatible With Quick-Attack Foam Tube Style AKR792 Available With or Without Pistol Grip Handle ​NH or NST = (National Hose Thread) or (National Standard Thread) - Both Are The Same Thread   Nozzle Tip Features: 1" NH Female Swivel Inlet 30-60-95-125 GPM Flow Settings Pattern Identification Larger More Legible Labels Simple to Operate (1/4 Turn From Straight Stream to Fog) Raised Lug Marks Straight Stream For Limited Visibility Operations Easy to Service & Repair Flow Setting at 100 PSI Raised Bumper Lug For Straight Stream Pattern Identification Compatible With Quick-Attack Foam Tube Style AKR755 ​NH or NST = (National Hose Thread) or (National Standard Thread) - Both Are The Same Thread

    $575.00

  • Amerex 50/50 Antifreeze Loaded Stream Charge

    Amerex Amerex 50/50 Antifreeze Loaded Stream Charge

    Amerex 506B 50/50 antifreeze loaded stream charge for model AMX240 2.5 gallon water fire extinguishers. Intended to be Used Between -40°F & 120°F

    $90.00

  • Amerex 530 Wet Chemical Charge

    Amerex Amerex 530 Wet Chemical Charge

    Amerex 530 wet chemical charge for Amerex 260 (K) fire extinguishers. Potassium acetate based, low PH. Comes in a 6 liter jug.

    $120.00

  • Amerex ABC Fire Extinguisher Amerex ABC Fire Extinguisher

    Amerex Amerex ABC Fire Extinguisher

    ABC or Multi-Purpose extinguishers utilize a specially fluidized and siliconized mono ammonium phosphate dry chemical. It chemically insulates Class A fires by melting at approximately 350°F and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires and will not conduct electricity back to the operator.    2.5LB Features: UL Rating: 1A:10B:C Capacity: 2.5lb. Height: 15.5" Width: 5.75" Depth: 3" Range: 9-15' Discharge Time: 10 sec. FM Approved: Yes Wall/Vehicle Bracket Included NFPA: Complies with NFPA 10 Standards 6 Year Warranty All Metal Valve Construction Temperature Range: -65°F to 120°F Large Loop Pull Pin 5LB Features: UL Rating: 3A:40B:C Capacity: 5lb. Height: 15.25" Width: 7.25" Depth: 4.25" Range: 12-18' Discharge Time: 14 sec. FM Approved: No Wall/Vehicle Bracket Included NFPA: Complies with NFPA 10 Standards 6 Year Warranty All Metal Valve Construction Temperature Range: -65°F to 120°F Large Loop Pull Pin 10LB Features: UL Rating: 4A:80B:C Capacity: 10lb. Height: 20" Width: 7.75" Depth: 5" Range: 15-21' Discharge Time: 20 sec. FM Approved: No Wall Bracket Included NFPA: Complies with NFPA 10 Standards 6 Year Warranty All Metal Valve Construction Temperature Range: -65°F to 120°F Large Loop Pull Pin 20LB Features: UL Rating: 10A:120B:C Capacity: 20lb. Height: 24" Width: 10.25" Depth: 7" Range: 15-21' Discharge Time: 30 sec. FM Approved: Yes Wall Bracket Included NFPA: Complies with NFPA 10 Standards 6 Year Warranty All Metal Valve Construction Temperature Range: -65°F to 120°F Large Loop Pull Pin Due to extinguishers being classified as "Hazardous Material", Danko only offers delivery of extinguishers by Motor Freight or local Sales Representative in your area.  You may pick up from Danko in Snyder, NE. 

  • Amerex ABC Recharge Powder

    Amerex Amerex ABC Recharge Powder

    Dry Chemical Powder (ABC Class) are mono ammonium phosphate-based powder that are generally for multipurpose use on Class A, B and C fires. It is monoammonium phosphate based containing chemical additives, and produced by an exclusive chemical process. The resultant agent is free-flowing, water repellant, non-abrasive, and when used as a fire suppressing agent will produce no toxic effects. ABC dry chemical is yellow in color to differentiate it from the other dry chemical agents. 50 LB Pail

    $168.00

  • Amerex Heavy Duty Vehicle Bracket

    Amerex Amerex Heavy Duty Vehicle Bracket

    All Amerex brackets are quality manufactured of steel with a primed and power coated paint finish. The paint finish assures many years of use and meets the latest U/L salt spray requirements.  AMX807: 4.25" Cylinder Diameter AMX809: 5" Cylinder Diameter AMX811: 7" Cylinder Diameter

  • Amerex Purple K Recharge Powder

    Amerex Amerex Purple K Recharge Powder

    Purple-K dry chemical agent may be used to combat fires in flammable liquids, gases, and greases (Class B) including such fires when involved with energized electrical equipment (Class C). Because of its excellent fire fighting effectiveness, Purple-K agent is widely used in the petroleum industry and in other areas where the fire risk is high. 50 LB Pail

    $275.00

  • Amerex Stainless Steel Water Fire Extinguisher

    Amerex Amerex Stainless Steel Water Fire Extinguisher

    Model 240 utilizes the cooling, soaking and penetrating effect of a 45-55' stream of  water. The 55 sec. discharge time makes it very effective for inexperienced operators for use on Class A fires. Features: Polished Stainless Steel Cylinders All Metal Valve Construction Exclusive Crevice Free, Butt Welded Cylinders Clean-Leaves no Powder Residue Stored Pressure Design 5 Year Warranty Large Loop Stainless Steel Pull Pin

    $170.00

  • Anchor New Generation Fire Shelter Anchor New Generation Fire Shelter

    Anchor Industries INC Anchor New Generation Fire Shelter

    When lives are on the line, there can be no shortcuts on quality. Anchor New Generation Fire Shelters are manufactured to US Forestry Service specifications and are US Government approved. With our manufacturing processes ISO 9001 certified, you can rest assured knowing that the utmost care and precautions are taken to craft the highest quality Fire Shelter. Offering increased protection from radiant and convective heat in wildland firefighter entrapment situations, Anchor New Generation Fire Shelters are the dependable solution for wildfire protection. Anchor Industries Inc. has been manufacturing government approved fire shelters for over 30 years. With specially designed manufacturing equipment, shelters are produced in large quantities with rapid turnaround. Government awards prove that Anchor fire shelters, tents and structures are an industry standard. Fire Shelter (Regular) Complete Size – Regular Deployed Size – Length: 86″; Height: 15.5″; Width: 31″ Includes – Fire Shelter, Nylon Duck Carrying Case & Carrying Case Plastic Liner Forest Service Spec 5100-606C. (NFES #0925) Regular Fire Shelter is Easily Identified by a Yellow Deploy Strap Fire Shelter (Large) Complete Large-size shelter designed for firefighters taller than 6’1″ or whose girth exceeds 53″ at any point. The larger fire shelter provides better protection for larger people by allowing less contact of the shelter material with the occupant’s body and provides more air space between the shelter and occupant. Size – Large Deployed size – Length: 96″; Height: 19.5″; Width: 33″ Includes – Fire Shelter, Nylon Duck Carrying Case & Carrying Case Plastic Liner Forest Service Spec 5100-606B. (NFES #0975) Large Fire Shelter is Easily Identified by The Orange Deploy Strap

    $680.00

  • Anti-Sway Strap [Plain] Anti-Sway Strap [Plain]

    Boston Leather Anti-Sway Strap [Plain]

    PRODUCT DESCRIPTION Keeps Radio Holster Closer to your body Clips to radio strap and turnout gear Heavy duty leather

  • ARM-LOC Rescue Device ARM-LOC Rescue Device

    Fire Ninja ARM-LOC Rescue Device

    ARM-LOC WATER / ICE RESCUE DEVICE The ARM-LOC allows a rescue responder or victim to slide the unit onto the forearm and then pull the yellow lanyard to deploy and lock it into place thus eliminating the need for the victim to grasp a rope. It can also help float the victim when the victim pulls the device close to his or her chest. It can be deployed in seconds and re-deployed over and over again.  Kit Contains -  - 1 ARM-LOC- 1 Rope Bag - 75' Sterling Water Line, Water Rescue Rope (15.2 kN)- 1 Omega Oval Carabiner (kN 22)- 12 Zinc Coated CO2 Cartridges

    $456.00

  • Auto Crib-It Collapsible Cribbing Kit Auto Crib-It Collapsible Cribbing Kit

    Auto Crib-It Auto Crib-It Collapsible Cribbing Kit

    A one of a kind, automatic cribbing system that allows firefighters to "set it and forget it." Once deployed the crib will maintain contact with the vehicle through a piston actuated system that raises and locks in place as the vehicle weight changes through the removal of body parts common in extrication practices. Traditional cribbing loses surface contact with the vehicle as body parts are removed and the vehicle's suspension system compensates for the weight loss.  Features PHTAC-213 (Yellow): Sold in Sets of Two Auto-Cribs Gold in Color Piston-Actuated For Stabilizing Vehicles in Seconds Automatically Re-Adjusts & Locks During Operations Can be Positioned Completely Under & Parallel to Rocker Panels to Avoid Trip Hazards & Stabilize Both Side-To-Side & Front-To-Back. Super Compact Leaves Storage Space For Other Vital Equipment. Taller Than Most Step-Chocks 28" x 4" x 2.75" Taller Than Most Step-Chocks (13" Tall) Lightweight (14.5 lbs.) Easily Decontaminated Made From High-Strength Aluminum Supports up to 2,000 lbs. Features PHTAC-217 (Red): Sold In Sets of Two Auto-Cribs Red in Color Piston-Actuated For Stabilizing Vehicles in Seconds Automatically Re-Adjusts & Locks During Operations Can be Positioned Completely Under & Parallel to Rocker Panels to Avoid Trip Hazards & Stabilize Both Side-To-Side & Front-To-Back. Super Compact Leaves Storage Space For Other Vital Equipment. Taller Than Most Step-Chocks 36" x 6" x 3" Taller Than Most Step-Chocks (17" Tall) Lightweight (23.5 lbs.) Easily Decontaminated Made From High-Strength Aluminum Supports up to 2,800 lbs.

    $1,045.00

  • AUX Portable Pump AUX Portable Pump

    Danko Emergency Equipment AUX Portable Pump

    Waterous 2515 Pump 75 GPM @ 135 PSI 150 GPM @ 90 PSI Volute Body & Head with High-Strength Aluminum Alloy Anodized for Superior Corrosion Resistance High Strength, Corrosion Resistant Bronze Impeller Fully Enclosed Mechanically Balanced to Eliminate Vibration Long Wearing Bronze Wear Rings High Strength Stainless Steel Shaft Sleeve Spring Loaded Mechanical Type Shaft Seal ENGINE OPTIONS Briggs & Stratton 18HP Vanguard V-Twin - Click for Manual Gas Engine Air Cooled Electric/Recoil Start Manual Choke & Throttle Controls Two Year Warranty Displacement- 570 cc; Bore x Stroke- 72 x 70 mm; Compression ratio- 8.2:1; Magnetron Electronic Ignition; Gross Torque- 28.7 lbs-ft @ 2,400 rpm; Gross Power Output- 18HP @ 3,600 rpm Honda V-Twin - Click for Manual Model GX630 20.8 Horsepower Air Cooled Keyed Electronic Start / Stop Ignition 4-Cycle Automotive-Style Lubrication System Dual Element Cylindrical Air Filter Gasoline Fueled NO Manual Recoil Starter Two Year Warranty Displacement- 688 cc; Bore x Stroke- 78x72 mm; Compression ratio- 9.3:1; Digital CDI ignition with variable ignition timing; Net Torque- 35.6 lbs-ft @ 2,500 rpm; Net Power Output- 20.8HP @ 3,600 rpm Shipping not included.  We will reach out to you, in regards to pickup or shipping.   

    $0.00

  • Barricade Tape Barricade Tape

    Danko Emergency Equipment Barricade Tape

    Manufactured for exceptional durability and resistance. An economical disposable marking solution, this premium tape comes in 3 Mil thickness to satisfy the most stringent applications. Features: 3" x 1000' Roll Economical, Lightweight & Reusable Strong 3 Mil Polyethylene High Visibility Weather Resistant Ideal For Outdoor or Indoor Applications

  • Barricade Tape Dispenser Barricade Tape Dispenser

    Logistics Supply Barricade Tape Dispenser

    Dispense 1,000 FT roll of 3” barricade tape quickly, safely, and efficiently. Serrated cutting blade built in. Lightweight and indestructible polypropylene construction. Easy to load into dispensers. Helps reduce waste and snares. Tape Tenders can also be used to dispense 2” and 3” detectable and non-detectable marking tapes and any other non-pressure sensitive tapes.   Tape not included; dispenser only. 

    $30.00

  • Binder Lift Binder Lift

    Binder Lift Binder Lift

    The Nylon Binder Lift is constructed with Cordura Denier 1000 Nylon for the torso wrap, polypropylene web strapping for the handles, and thermoplastic polyurethane slick-strap for the leg straps. It received the 2013 Hot Product of the Year award from the Journal of Emergency Services and the Innovation of the Year award from EMS World. To clean, simply put it in the machine wash or extractor. It's available in two sizes, Standard (navy blue) and Bariatric (royal blue). Key Features: Patented torso wrap design for superior patient stability and control Cushioned top edge for patient comfort. Removable impervious leg straps for versatility and easy cleaning 24 - 32 handles (size dependent) in multiple rows and orientation for unmatched grip and leverage versatility. Industrial strength color coded buckles Compact storage bag Machine washable Key Benefits: Experience easier and safer patient handling. 24- 32 handles permits team lifting while using proper ergonomics Rapid application, even in confined space. Safely and easily move the patient from the bathroom floor all the way to the hospital bed with one simple product. Minimize patient discomfort and risk of injury. Cushioned top edge and torso wrap design reduces bruising and skin tears while providing superior patient stabilization and security. Minimize risk of lifting injuries. The Binder Lift is proven to reduce shear forces on the lifters spine when compared to traditional lifting methods. The right tool for the job. Prevents unsafe improvising by eliminating the need to use bed sheets and transfer tarps in outdated and dangerous ways.   The Vinyl Binder Lift is constructed with Bondcote vinyl coated polyester for the torso wrap, and thermoplastic polyurethane slick-strap for the handles and leg straps. It received the 2014 Hot Product of the Year award from the Journal of Emergency Services and the Safety Innovation Feature award from the EMS Safety Foundation. To clean, simply wipe down with a sani-wipe or other disinfectant. It's available in two sizes, Standard (navy blue) and Bariatric (royal blue). Key Features: Patented torso wrap design for superior patient stability and control Cushioned top edge for patient comfort. Removable impervious leg straps for versatility and easy cleaning 24 - 32 handles (size dependent) in multiple rows and orientation for unmatched grip and leverage versatility. Industrial strength color coded buckles Compact storage bag 100% made from medical grade impervious material for quick and easy cleaning  Key Benefits: Experience easier and safer patient handling. 24- 32 handles permits team lifting while using proper ergonomics Rapid application, even in confined space. Safely and easily move the patient from the bathroom floor all the way to the hospital bed with one simple product. Minimize patient discomfort and risk of injury. Cushioned top edge and torso wrap design reduces bruising and skin tears while providing superior patient stabilization and security. Minimize risk of lifting injuries. The Binder Lift is proven to reduce shear forces on the lifters spine when compared to traditional lifting methods. The right tool for the job. Prevents unsafe improvising by eliminating the need to use bed sheets and transfer tarps in outdated and dangerous ways. Quick and easy to clean. Wipe down after every call and it's ready to go for the next.

    $615.99

  • Black Diamond Battle Ops - Tactical Boot

    Black Diamond Black Diamond Battle Ops - Tactical Boot

    Black Diamond Battle Ops 6" Waterproof Tactical BootThe Battle Ops 6" Waterproof Tactical Boot is light and flexible. The EVA mid-sole provides shock absorbing comfort while the fiberglass shank offers support and torsional rigidity. The Battle Ops durable rubber outsole delivers slip resistant traction for any terrain and our removable custom fit foot-bed provides all day comfort.Features: Waterproof Breathable Membrane keeps feet dry but lets them breathe Generous Multi Fit Allows you to customize your perfect fit Heel Comfort Pods Anatomically positioned to secure the ankle Polish-able Toe Easy to polish for uniform coordination Meets ASTM F2892-17 EH APMA Approved Approved by the American Podiatric Medical Association Battle OPS gear is built to the exact specifications of professionals from around the world. For those who cannot differentiate between their "job" and their passion, our gear is engineered to an unrivaled standard. Our commitment to meet the needs of those on the front lines will never end... always move forward.

    $109.99

  • Black Diamond NFPA Rubber Boot

    Black Diamond Black Diamond NFPA Rubber Boot

    Not all rubber boots are made the same, Black Diamond Rubber Fire Boots provide maximum protection with all-day comfort and support. Our accurate fit design, large spacious steel toe and removable Ortholite® foot-beds provide unmatched comfort making it the BEST DAMN RUBBER FIRE BOOT. PERIOD. The Comfort Fit System is built upon a removable Ortholite® foot-bed that is breathable, long-lasting and durable. Below the foot-bed is a high-density polyurethane midsole which absorbs energy and provides cushioning. Features: Comfort System: Comfort Fit Plus - With Enersole Boot Height: 16" Upper Midsole: 2.0 mm High Density Rubber With Calendared Fabric Lower Midsole: 6.8 mm Coated Felt Insulation: 6.0 mm Open Cell Foam Leg Lining: Kevlar®/Nomex® with 1.2 mm Coating Leg Lining Stitch: Lining Includes Backstitch Toe Lining: 1.4 mm Net Lining Calendared Coated Tibia Protection: 3.0 mm Heavy Corrugated Roll Steel Toe: ANSI - Z41-1999 Standard Steel Midsole: Stainless Steel Steel Shank: Triple Ridge Steel Outsole: Molded Rubber K-Lug Design Foot-bed: PU Orthotic, Fabric Covered, Removable Pull-On System: Cotton Drill Friction Coated With Spread Cotton & Nylon Net Meets or Exceeds NFPA 1971 & NFPA 1992

    $199.99

  • Black Diamond X2 NFPA - Leather Boot Black Diamond X2 NFPA - Leather Boot

    Black Diamond Black Diamond X2 NFPA - Leather Boot

    Nothing beats a pair of Black Diamond's flagship structural leather fire boots.  Our X2 boots use genuine fire-retardant leather and fusion fabric to provide ultimate durable protection.  CROSSTECH waterproof membrane and NO liner pull-out design along with our comfort fit plus ORTHOLITE foot-bed makes the X2 the BEST DAMN LEATHER FIRE BOOT. PERIOD. Features: Comfort System: Comfort Fit Boot Height: 14" Leather Upper: Fire-tuff Leather With Fusion Fabric 3-Point Heel Lock System: Exclusive 3-Point Heel Lock Lining: Cross-tech Fabric With Omaha Lining Kevlar Lining: Kevlar Lined For Protection Tibia Protection: Padded Shin-Guard Protection & Comfort Toe Cap Protection: Rubber Toe Cap For High-Abrasion Steel Toe: Hi 500, Meets or Exceeds ASTM Standards Steel Midsole: Lenzi Puncture Protection Steel Shank: Ridge Steel Outsole: Rubber Comfort Cup Sole With Comfort Flex, High-Abrasion & Traction Performance Foot-bed: Ortho-lite Multi-Fit, Tri-Density, Breathable & Removable Pull-On System: Integrated Pull-On System Meets or Exceeds NFPA 1971 & NFPA 1992

    $350.00

  • Black-Fire Nitrile Exam Gloves

    Henry Schein Black-Fire Nitrile Exam Gloves

    With proprietary QUICK CHECK® breach detection technology, NEW BLACK-FIRE® nitrile exam gloves offer the unique ability to detect rips and tears by revealing a high-visibility orange inner layer through the breach. These dual-purpose gloves can also be reversed and worn with the bright orange side out in situations that call for high-visibility. Features: NFPA 1999-2013 Certified Reversible Breach Detection Length: 9.5" Made Without Natural Rubber Latex Powder-Free Textured Fingertips Ambidextrous

  • BlastMask Training Regulator BlastMask Training Regulator

    Darley BlastMask Training Regulator

    BlastMask® Training Regulators attach to your facepiece and simulate real-world SCBA breathing without draining your cylinders, or your budget. With new enhancements, including a bypass valve and slide latch that mimics SCBA functionality, it's even more true to life. So you can train like it's real. And be tactically fit when it counts. Easy Air Bypass Valve - instant access to full air with a half turn Rugged Slide Latch - attaches just like an SCBA regulator Superior Construction - upgraded polycarbonate resin More than 50% of line-of-duty deaths and 30% of firefighter injuries can be attributed to stress, overexertion and a general lack of fitness. BlastMask enables you to conduct multiple training and fitness exercises (with and without SCBA packs) that can dramatically improve your tactical preparedness. As your familiarity with equipment increases, so does confidence and performance. BlastMask is an effective and ideal tool for firefighter recruitment, physical ability testing, and orientation. BlaskMask makes a positive impact on your budget and resources. Fire service fitness initiatives have shown a decrease in lost workdays by 28%. What’s more, every dollar spent on uniformed personnel wellness returns over two dollars in occupational injury and illness costs. Blast Mask also saves the manpower and time it takes to refill SCBA bottles, keeping resources ready for real emergencies. Not to mention it decreases wear and tear on expensive SCBA regulators. In the line of duty, an SCBA regulator and pack weight reduce VO2 max (maximal oxygen consumption) by 14.9% – primarily from the regulator. Additionally, peak power output and SPO2 (oxyhemoglobin saturation) are decreased by the regulator alone. TRAINING IN A FACEPIECE AND PACK ALONE DOES NOT REDUCE VO2 MAX, PEAK POWER OUTPUT AND SPO2.

    $0.00

  • Bleeding Control Kits Bleeding Control Kits

    R&B Fabrications, INC Bleeding Control Kits

    Bleeding Control Kits provide the essential tools needed to stop bleeding quickly. Whether they are needed for a car accident or an active shooter situation, these kits can provide the medic, or even the general public, to act as a responder. There are three levels of kits: Basic, Intermediate and Advanced. The Bleeding Control kit comes in a vacuum-sealed pouch with all of the contents sealed securely inside for a longer life-span. Sealed kits fit directly into the Empty IFAK/Active Shooter Response Pouch for easy transport. Overall measurements are 7"H x 4"W x 3"D.    Basic Kit  1 - C-A-T Tourniquet 1 - 6" Responder ETD, Trauma Dressing2 - NAR Compressed Gauze2 Pair - BearClaw Nitrile Gloves, Large1 - NAR Trauma Shear, 7.25"1 - Permanent Marker1 - Just in Time Instruction Card  Intermediate Kit 1 - C-A-T Tourniquet 1 - 6" Responder ETD, Trauma Dressing2 - NAR Compressed Gauze2 Pair - BearClaw Nitrile Gloves, Large1 - NAR Trauma Shear, 7.25"1 - Permanent Marker1 - Just in Time Instruction Card 1 - HyFin Vent Compact, Twin Pack Advance Kit  1 - C-A-T Tourniquet 1 - 6" Responder ETD, Trauma Dressing2 - NAR Compressed Gauze2 Pair - BearClaw Nitrile Gloves, Large1 - NAR Trauma Shear, 7.25"1 - Permanent Marker1 - Just in Time Instruction Card 1 - HyFin Vent Compact, Twin Pack1 - Combat Gauze LE, Hemostatic 

  • Brody Wet Water

    Brody Chemical Brody Wet Water

    "Wet Water" Water which has had a wetting agent added. Doing so reduces surface tension and allows the water to penetrate into the burning substance more easily. This it helpful in several applications. One of the best examples might be the overhaul of bails of hay. It will also assist with some structure fires. (1) Gallon to 4,000 Gallons of Water One Gallon Containers

    $24.00

  • Brooks Polycarbonate Wildland Nozzle

    Brooks Equipment Brooks Polycarbonate Wildland Nozzle

    Brooks high-impact polycarbonate nozzles are an economical alternative to the more expensive brass models with the same array of spray patterns - straight stream to fog. NH or NST = (National Hose Thread) or (National Standard Thread) - Both Are The Same Thread NPSH = (National Pipe Straight Hose Thread) or IPT (Iron Pipe Thread) - Both Are The Same Thread

  • Bullard - FX Helmet

    Bullard Bullard - FX Helmet

    Bullard FX Series Fire Helmet The FX Series fiberglass, contemporary style structural fire helmet is designed to withstand frequent exposure to chemicals and hydrocarbons. Certified to NFPA 1971-2018, this helmet incorporates recommendations from veteran fire professionals from around the world. A low center of gravity provides FX models with a balanced and stable fit, increasing overall comfort. The Bullard Sure-Lock® ratchet headband adjusts to the wearer’s head with a quick turn of the knob. Additional adjustment points permit custom fit, personalized balance and interface with the SCBA.  FX helmets feature 3M Scotchlite® striping, which retains reflectivity to 500° F (260° C). That makes Scotchlite the toughest material available for helmet markings. This series includes models that meet CE requirements and U.S. Navy requirements. Chemical-resistant fiberglass outer shell High-heat thermoplastic inner shell Comfortable Sure-Lock® ratchet headband Balanced 6-point nylon crown straps and crown pad Nomex® chinstrap with quick-release buckle and postman’s slide fastener Rip-stop Nomex® ear/neck protector Leather ratchet cover Removable fire-resistant, absorbent cotton brow pad Hard-coated optically-correct faceshield Scotchlite® reflective striping 12 point comfort system Model FXA1 meets U.S. Navy requirements for shipboard firefighting (GSA and commercial availability) Model FXE tested and certified to EN 443 by INSPEC, CE certified (for export only) Certified to NFPA 1971-2018 standard

    $275.00

  • Bullard UST - Light Pink

    Bullard Bullard UST - Light Pink

    Bullard UST Series Fire Helmet  Toughness and durability are inherent in this traditional series of fire helmets. The UST Series of structural firefighter helmets provide traditional styling in an affordable, easy-to-maintain design. This helmet incorporates recommendations from veteran fire professionals from around the world. With an outer shell made of fiberglass, the UST provides toughness and durability. The Bullard 12-point comfort system allows for the ultimate in helmet comfort, no matter how firefighters like their helmet to ride. The Bullard Sure-Lock® ratchet headband adjusts to the wearer’s head with a quick turn of the knob. Additional adjustment points permit custom fit, personalized balance and interface with the SCBA. Chemical-resistant fiberglass outer shell, brass Stars and Stripes Eagle accommodates any leather front Intricately-designed, brass Stars and Stripes Eagle accommodates any leather front High-heat thermoplastic inner shell Comfortable Sure-Lock® ratchet headband Balanced 6-point nylon crown straps and crown pad Nomex® chinstrap with quick-release buckle and postman’s slide fastener Rip-stop Nomex® ear/neck protector Leather ratchet cover Removable fire-resistant, absorbent cotton brow pad Hard-coated optically-correct faceshield Available with leather-look matte finish Scotchlite® reflective striping Certified to NFPA 1971-2018 standard

    $0.00

  • Bullard Wildland Helmet

    Bullard Bullard Wildland Helmet

    COMPLIANCE: Helmet shall meet or exceed all performance standards and specifications under NFPA 1977-2011, ANSI/ISEA Z89.1, Type I, Class E & G, Cal-OSHA, State of California Class A, and US-OSHA. HELMET CONSTRUCTION: Outer Shell - Helmet shall be constructed of heat-resistant thermoplastic and feature a distinctive three-rib trademark. SUSPENSION: Shock attenuation system shall consist of a 6-point crown strap suspension that is anchored to the outer shell and positioned to distribute energy over 3 cross straps that attach at 6 points. Helmet shall utilize ratchet adjustment incorporated into the headband suspension system. The helmet suspension shall contain vertical adjustments (2 Front, 2 side, 3 Rear). Suspension and headband shall contain no metal components. ACCESSORIES: Helmet shall include an adjustable chin strap, goggle clips (3), lime-yellow Scotchlite® strips (3), and Velcro® attachment strips (3) on inner shell. It features a replaceable padded cotton brow pad, and leather ratchet cover. PHYSICAL CONFIGURATION: Basic helmet shall feature a full-brim, hat-style design with the following specifications: Length: 12-1/2” Width: 10-3/4” Extra-Large helmet shell feature: Length: 13-1/4" Width: 11" HELMET COLORS: Helmet shell shall be colorfast, not painted. Basic helmets shall be available in seven standard colors: White, Red, Yellow, Black, Orange, Blue, and Lime-Yellow. Extra-Large helmets shall be available in three standard colors: White, Red, and Yellow.

  • C&S Supply Wildland Drip Torch

    C&S Supply C&S Supply Wildland Drip Torch

    This Wildland Drip Torch is easy to use and requires no pumping or preheating. Simply soak and light the igniter; as you angle the drip torch at a downward angle it drips a trail of flaming fuel. Features: Fuel trap in spout prevents flashback Reversible burner for easy storage Check valve to protect against flashback Breather valve, sealed outlets and oil proof gaskets prevent fuel spills Large diameter mouth for easy filling Heavy duty, lightweight aluminum body Double bottom for extra durability Meets DOT regulations for transport of flammable fuel UN #IBI-Y-150 and Forest Service Specification USDA FS 5100-614 Height: 14” closed, 25-1/2” assembled Diameter: 6” Capacity: 1-1/4 US Gallons

    $280.00

  • C&S Supply Wyes C&S Supply Wyes

    C&S Supply C&S Supply Wyes

    C&S Supply forestry wyes with (2) ball shutoffs and multiple configurations. Swivel NH Female Inlet x (2) Rigid NH Male Outlets NH or NST = (National Hose Thread) or (National Standard Thread) - Both Are The Same Thread

    $243.00

Login

Forgot Password?

Don't have an account yet?
Create Account