Helmet Lights

The solution to firefighters’ hands-free lighting needs. Attaches easily to helmets and hard hats, and rotates 360º. Fits snugly against helmet to prevent snags. Features a bright taillight LED so you can be seen from behind even in heavy smoke. Easy to operate with gloves. Fits both traditional and modern helmets. Features: Lightweight, Compact, Low Profile Design Easily Attaches/Detaches Above or Below Brim on Fire Helmets, Industrial Helmets & Hard Hats C4® LED Delivers 7,000 Candela Peak Beam Intensity; 115 Lumens; 167 Meter Beam Distance Run 6 Hours to The 10% Output Level Features an Ultra-Bright Blue Taillight LED Fits Both Traditional & Modern Style Helmets Tighten Clamp With Your Fingers. No Tools Necessary! Swivel Clamp & Insert-able 5° Angle Adjuster to Optimize Beam Location Rotates 360º on Clamp Textured Parabolic Reflector Produces A Smooth Beam Hotspot With Optimum Peripheral Illumination Anodized Aircraft Aluminum Construction With High Temperature, Shock Mounted, Impact Resistant Boro Float Glass Lens High-Impact, Chemically-Resistant Engineering Polymer LED Housing With Reflective Strip IPX7 Waterproof to 1 Meter For 30 Minutes Uses Two 3V CR123A Lithium Batteries (Included) Length: 3.26" Assembled in USA Meets Requirements of NFPA 1971-8.6 (2013)

Read more less

PolyTac features a rugged housing, extreme brightness and extended run times. TEN-TAP® Programming lets you choose the order of operating modes: 1.) high/strobe/low; 2.) high only; 3.) low/high. IPX7- waterproof to 1m for 30 minutes. Streamlight Helmet Mount can be used in conjunction with the PolyTac. Durable, lightweight, aluminum mount easily attaches to the brim of firefighter’s helmets with no tools required. Rubber Helmet Strap can be used in conjunction with the PolyTac. It is a quick and easy, “no tools required” method to attach your PolyTac to almost any helmet. Made of engineered high-strength rubber. Also fits hard hats. Four Modes: High - 600 Lumens - 11,500 Candela - 2.75 Hour Run Time Medium - 260 Lumens - 4,900 Candela - 5.5 Hour Run Time Low - 35 Lumens - 675 Candela - 34 Hour Run Time Flash - 5.5 Hour Run Time Kit includes: Polytac With Lithium Batteries Streamlight Helmet Mount Rubber Helmet Strap Features: C4® LED Technology Within a Parabolic Reflector Produces a Concentrated Beam With Optimum Peripheral Illumination Solid State Power Regulation Provides Maximum Light Output Throughout Battery Life High-Impact, Super-Tough Nylon Polymer For Exceptional Durability & A Superior Grip Texture To Provide a Comfortable But Slip-Resistant Feel IPX7 Waterproof to one Meter For 30 Minutes Powered by (2) 3V CR123A Lithium Batteries (Included) Length: 5.34” Weight: 4.2 oz. With Batteries 

Read more less

The new and versatile Vantage 180 X for firefighters is three lights in one! It's a helmet mounted light for hands-free tasks, a right angle light that can attach to your turnout gear, and a handheld flashlight. So wear it, hold it, clip it, or even hang it! This light is available two ways, the Vantage 180 X USB is a complete rechargeable system that includes one 18650 USB battery with a micro USB port right in the battery. The Vantage 180 X includes two CR123A lithium batteries. Two Modes: With Lithium Batteries High - 250 Lumens - 7,200 Candela - 4 Hour Run Time Low - 100 Lumens - 2,650 Candela - 12 Hour Run Time With USB Battery & USB Charge Port High - 250 Lumens - 7,200 Candela - 5 Hour Run Time Low - 100 Lumens - 2,650 Candela - 15 Hour Run Time Features: The Light Features Multi-Fuel Innovation That Allows it to Accept Either (1) Rechargeable USB Battery or (2) CR123A Lithium Batteries, so You'll Always Have a Beam When You Need it Fits Both Traditional & Modern Style Helmets Easily Attaches Above or Below Helmet Brim Rear BLUE LED Taillight For Helmet Mount Use so You Can be Seen From Behind Forward Facing Spot Light With Downcast Light White LED Taillight in Right Angle Mode Has a Downcast Flood Light to See What's at Your Feet (Switches From Blue LED) Head Articulates 180º to Aim The Beam Where You Need it Push-Button Switch For Easy, One-Handed Operation High-Impact, “Super-Tough” Nylon Construction Integrated Stainless Steel Clip For Maximum Flexibility Turnout Gear Attachment Hook Includes Quick Release Helmet Bracket & Hex Key IPX7 Waterproof to 1 Meter For 30 Minutes; 1 Meter Impact Resistance Tested Meets Requirements of NFPA 1971-8.6 (2013)

Read more less

This low-profile headlamp features multiple modes to cover a variety of tasks: spot for a focused beam, flood for soft area illumination that won’t tire your eyes and red light to preserve night vision. Multi-function switch remembers the last mode used. IPX4 water-resistant. Three Modes: Spot For Distance Lighting: High - 200 Lumens - 2,250 Candela - 6 Hour Run Time Medium - 75 Lumens - 825 Candela - 14 Hour Run Time Low - 25 Lumens - 300 Candela - 38 Hour Run Time Flood For Area Illumination For Distance Lighting: High - 135 Lumens - 210 Candela - 6 Hour Run Time Medium - 45 Lumens - 80 Candela - 25 Hour Run Time Low - 15 Lumens - 20 Candela - 38 Hour Run Time Red LED to Pressure Night Vision High - .25 Lumens Low - 1.25 Lumens Features: Multi-Function Push-Button With Mode Memory Tough Polycarbonate Thermoplastic Construction With Elastomer Over Mold; Unbreakable Polycarbonate Lenses Powered by (3) “AAA” Alkaline Batteries (Included) Also Accepts “AAA” Lithium Batteries 45º Tilting Head IPX4 Water-Resistant 2 Meter Impact Resistance Tested Rubber Hard Hat Strap & 3M Dual Lock Reclosable Fasteners Weight: 3.4 oz. 

Read more less